AC and DC  Spindle Motor Repairs

We can take the hassle out of all your  spindle motor repair needs. Established in 1988 EDMR is the leading independent repairer of  spindle motors in the UK. Major investment over a 20 year period sees us leading the field in the repair of AC & DC  spindle motors.

EDMR offers a cost effective and reliable service for all your  spindle motor repairs including motors from many of the leading manufacturers.

So why use EDMR?

Because repairing  spindle motors is core to our business.  spindle motors are not like standard induction motors, they need specialist staff, knowledge, equipment and test facilities. At EDMR we have all these attributes. If you have ever used a local rewind company you will probably hear them say we can have a go but can't test it. Not a good situation to be in if what you really want is an OEM quality repair. And talking of OEMs we are authorised by a number of  spindle motor manufacturers which emphasises our dedication to quality and service.

Workscope (for Spindle Motor)

• Carry out electrical checks and test, resistance test & insulation test.
• If motor is received in a running condition the motor is run and checked against OEM specification.
• Feedback device(s) checked for operation against OEM specification.
• Motor is dismantled.
• Check bearing housings and shaft for concentricity.
• Clean and degrease component parts of the motor.
• Remove and replace bearings & seals.
• Reassembly of motor
• Complete test against OEM specification.
• Motor is run in using WI and or OEM specification.
• Test motor on Inverter, dynamic load test at full speed.
• Check vibration levels against specification.
• Spray finish motor where applicable.

Testing

All  spindle motors are fully tested by our trained spindle engineers. Every AC / DC  spindle motor is tested both statically and dynamically to insure proper operation. Encoders, resolvers and tachometers are set-up and calibrated to the correct position and signal. Brakes are tested to ensure they are achieving the OEM specified holding torque. EDMR has over 30 different manufacturers drives so that we can match a motor to its equivalent drive. EDMR has also invested in a number of specialist drive configurations that allow us to auto-size motors to a generic drive. Above all we aim to fully test your motor to OEM specification.

Support

At EDMR we don't just repair motors and think nothing more of the customers. We like to build a relationship with our customers and try and improve the reliability of their motors. If we see a recurring problem we identify it and talk through the problem to see if we can locate the reason for a premature or repetitive failure. It is this level of support that major blue chip companies look for in their suppliers. Our current repair database lists over 50,000  spindle motor repairs that we have carried out, from no less than 500 different motor manufacturers. So chances are we have repaired most of the  spindle motors available.

24-7-365

Reducing downtime is critical to our customers and we are here to help where we can. When our customers have an emergency we are able to offer an expedited repair service. Our extensive range of stock parts enables us to provide a fast turnaround without the costly delay in ordering parts from a supplier. More and more we are stocking complete service exchange motors and drives to cover these emergency breakdown situations. On occasions where we have to source parts from a third party we will keep you informed of the progress of the job.

Quality

Quality is at the core of EDMR. Established in 1988 it is a commitment to quality that has enabled us to remain the leaders in  spindle motor repairs. Our ISO procedures are specifically written to cover the repair of electric motors and drives. Comprehensive work instructions are available for all manner of  motors and feedback devices which enables EDMR to provide a cost effective high quality service.

Pricing

Although we able to offer a rough guide to standard overhauls the most accurate way of pricing your repair is to evaluate, inspect and test it. On receipt of a  spindle motor this is exactly what we do. After the engineer has completed a full investigation (typically 2 hours) the details of faults, if any are found, are passed onto the service manager who then provides a fully itemised quotation detailing the parts failed and the cost of the repair. In addition the quotation will indicate how long the repair will take given current stock availability.

Warranty - All  spindle motors repaired at EDMR comes complete with 12 months warranty.

Next Step

Request a call back to discuss your requirements or arrange a sales visit: click here

To contact the motor department call +44 (0)1604 499777 and select option 1

To arrange a free collection: click here
 

Remember:
There is no need to send your motors back to the OEM, pay a high price, and wait weeks to get your motors returned... Send them to us!